| Description | Made by Hawg Halters Inc. (HHI), these custom triple trees are made of billet aluminum & allow the correct installation of a 26″ front rim conversion. Manufactured to suit 2002-2011 Harley-Davidson V-Rod with conventional front end & OEM headlight setup. Direct replacement for factory triple trees, no modifications required.
Available in black.
Be sure to contact the Elitecustoms team for expert advice on fitment for your bike before ordering.
Additional information
| Weight |
8 kg |
| Dimensions |
40 × 40 × 30 cm |
| If you’re considering a huge power increase for your V-Rod, forced induction is the way to go, instantly adding 70HP – 90HP to your current setup.
It’s been the countless hours & multiple improvements made over the years that make this kit perform flawlessly. We’ve proven this kit to be reliable for everyday riding, it runs perfect with it’s cooling system & it sits nice & tidy for comfort on those longer trips. Not only are you getting an enormous power increase, but the look & sound of the supercharger does not compare.
Kit includes:
- Rotrex Supercharger – C15-60
- Air filter
- Intake plenum
- Intake plenum breather system
- Main side plate
- Supercharger side plate
- Oiling system
- 1L bottle of supercharger specific oil
- Main drive shaft & pulley
- Idle tensioner & pulley
- Belt
- Blow off valve
- Air temperature sensor
- Injectors
- Fuel pressure regulator
- Silicone joiners & clamps
- All mounting nuts & bolts
- Instructions available on request
PLEASE NOTE:
The DarkSide Custom Harleys Supercharger Kit – V-Rod Stage 1 requires the following additional components for installation:
- Heavy duty clutch
- Power Commander V ECU Tuner
- Dyno tune
Available in black or polished. Raw available on special request.
Be sure to contact the DarkSide team for expert advice on fitment for your bike before ordering.
Color: Black or Polished
Additional information
| Weight |
25 kg |
| Dimensions |
52 × 52 × 50 cm |
| Colour |
Black, Polished |
| Exclusive to Custom Harleys. The lowest sitting Air Ride system on the market available for your V-Rod.
Arnott’s new rebound adjustable Ultimate Ride Air Suspension Kit for Harley-Davidson® has been custom designed to provide the rider with superior control, ride comfort and height adjustability. The kit, featuring Arnott’s TruAIR® Technology, includes a rugged air spring sleeve and shock damper design. At the core of this system are two custom nitrogen-charged FOX® shock absorbers with rebound control knobs. Then, using a patent-pending design, Arnott adds a rugged Goodyear® air spring, ensuring superior comfort, ride quality, and durability. Arnott pairs your shocks with a small but powerful compressor, application-specific mounting bracket, and air distribution valve block which includes a muffler to control how fast air is released.
The Arnott’s Air Ride SuperLow Kit has everything you need for installation:
- 2 x Black FOX shock absorbers with rebound adjustment
- 1 x High output compressor
- 1 x Black handlebar toggle switch
- 1 x Air distribution valve
- 1 x Fused wiring harness
- 1 x Relay
- All mounting hardware
- Nylon air tubing
- Cable ties
| Made by Hawg Halters Inc. (HHI), these custom triple trees are made of billet aluminum & allow the correct installation of a 23″ front rim conversion. Manufactured to suit 2002-2011 Harley-Davidson V-Rod with conventional front end & OEM headlight setup. Direct replacement for factory triple trees, no modifications required.
Available in black.
Be sure to contact the Elitecustoms team for expert advice on fitment for your bike before ordering.
Additional information
| Weight |
8 kg |
| Dimensions |
40 × 40 × 30 cm |
| Designed to replace OEM brake discs on 2006-2017 V-Rod models for increased stopping performance.
Full floating to ensure optimum brake pad-to-rotor contact. Every high-quality, Galfer-patented Wave® rotor is made from a proprietary mix of virgin high carbon 420 stainless steel, laser cut (never stamped), double disc-parallel ground to assure perfect parallel flatness and heat treated to each specific application. KBA and TUV approved.
Be sure to contact the Elitecustoms team for expert advice on fitment for your bike before ordering.
Additional information
| Weight |
2 kg |
| Dimensions |
35 × 35 × 5 cm |
| This is the Custom Harleys guaranteed >200HP package!
It’s been the countless hours & multiple improvements made over the years that make this kit perform flawlessly. We’ve proven this kit to be reliable for everyday riding, it runs perfect with it’s cooling system & it sits nice & tidy for comfort on those longer trips. Not only are you getting an enormous power increase, but the look & sound of the supercharger does not compare.
Ordering this kit through the team does not stop there, we’re only a phone call away to assist you through the installation process. We’re available to answer all your questions and & also to guide you to achieve your horsepower goal.
Kit includes:
- Rotrex Supercharger – C30-74
- Air filter
- Intake plenum
- Intake plenum breather system
- Main side plate
- Supercharger side plate
- Oiling system
- 1L bottle of supercharger specific oil
- Main drive shaft & pulley
- Idle tensioner & pulley
- Belt
- Blow off valve
- Air temperature sensor
- Injectors
- Fuel pressure regulator
- Silicone joiners & clamps
- All mounting nuts & bolts
- Instructions available on request
PLEASE NOTE:
The Custom Harleys Supercharger Kit – V-Rod Stage 2 requires the following additional components for installation:
- Custom front mount intercooler
- High performance cams
- Metal head gaskets
- High performance head studs
- Heavy duty clutch
- High volume fuel pump & relay
- Power Commander V ECU Tuner
- Dyno tune
Available in black or polished. Raw available on special request.
Be sure to contact the team for expert advice on fitment for your bike before ordering.
Color : Black or Polished
Additional information
| Weight |
30 kg |
| Dimensions |
60 × 60 × 60 cm |
| Colour |
Black, Polished |
|
